A hard disk drive fails:
Contact your service representative.
→
Cannot enter Hibernation:
If you use LSI Embedded MegaRAID, system may not enter hibernation with
→
heavy I/O.
Cannot enter standby:
If you use LSI Embedded MegaRAID, system may not enter standby with
→
heavy I/O.
Physical device is not correctly displayed on Universal RAID Utility
If you use LSI Embedded MegaRAID, a part of information on a physical
→
device is not correctly displayed on Universal RAID Utility.
It is no problem.
Troubleshooting 8-45