Table of Contents
Advertisement
5-30 Installing the Operating System with Express Setup
Installing RAID Controller Driver (N8103-115)
The installation procedure depends on your environment.
Follow steps below appropriate to your environment.
If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is used:
You do not need to install the driver manually. It is automatically installed by Windows Plug-and-
Play.
If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is not used:
Install the driver by the following procedures.
1.
Start [Device Manager] from [Start] menu → [Administrative Tools] → [Computer
Management].
2.
Double-click the "LSI Logic MegaRAID SAS 8880EM2 RAID Controller" which Device
Manager lists as "Storage controllers".
3.
Click [Update Driver].
4.
When the "Update Driver Software- Logic MegaRAID SAS 8880EM2 RAID Controller
Wizard" appears, select "Browse my computer for driver software".
5.
Select "Let me pick from a list of device drivers on my computer".
6.
Click [Have Disk..].
7.
Insert "NEC EXPRESSBUILDER DVD" into the optical disk drive.
Enter a path to the folder in the NEC EXPRESSBUILDER DVD into "Copy
manufacturer's files from:" and click [OK].
– Windows Server 2008 64-bit (x64) Edition:
<drive letter>:\010\win\winnt\oemfd\ws2008x64\fd1\megasas
– Windows Server 2008 32-bit (x86) Edition:
<drive letter>: \010\win\winnt\oemfd\ws2008\fd1\megasas
8.
Specify the following driver and click [Next].
– [LSI Logic MegaRAID SAS 8880EM2 RAID Controller]
9.
Click [Close].
The installation of the driver is completed. Restart the system.
Advertisement
Table of Contents
