Table of Contents
Advertisement
F-10 Installing Windows Server 2003
11.
<If the SCSI Controller N8103-95 is connected>
Press S.
The screen of Step 6 is displayed. Press Enter, and go to Step 12.
<If the SCSI Controller N8103-95 is not connected>
Press Enter, and go to Step 13.
12.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra160 SCSI Cards (Win Server 2003)] and press Enter.
IMPORTANT:
the N8103-95 SCSI controller, press S.
The screen of Step 5 is displayed.
Press Enter, and go to Step 13.
13.
When the following message is shown, press Enter to start "Welcome to Setup".
IMPORTANT:
larger than 2,097,152MB(2TB), you can specify only a value equal to
or less than 2,097,152MB as partition size.
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 160 SCSI Cards (Win Server
2003)"
Unless the device manufacturer prefers that
you use the driver on the floppy disk, you
should use the driver in Windows.
If you install Windows Server 2003 on the hard disk
Advertisement
Table of Contents
