76
en | Configuration
8
Configuration
This chapter specifies how to configure the AMAX panel. It includes the different ways to
program the AMAX panel.
8.1
Programming with the Keypad
8.1.1
Text Keypad Menu Programming
1.
2.
3.
4.
5.
6.
Warning!
!
Programming parameters must be set within the range of the programming address.
Otherwise, the system will turn to an indeterminate status.
2014.4 | 01 | F.01U.267.112
Enable the text keypad and confirm that the system is in disarmed status.
Enter installer code + 958 and press # to get to [installer menu].
Select the menu and operate according to the menu prompt.
–
Down to the next menu: Press [▼]
–
Up to the previous menu: Press [▲]
–
Enter menu or confirm input: Press [#]
–
Back to the menu or delete a single input: Press [-]; or press and hold [-] for 3
seconds to end the input state and get back to the menu
–
Operate according to the menu prompt. Select menu and enter data for specific
programming items according to the display on the keypad to complete
programming, step-by-step
–
The data value ranges in the menu programming and address programming are the
same. For specific options and value ranges, see contents in LCD Keypad Menu
Programming
After completing input, press [-] to get back to the previous menu. Complete all
programming input by repeating step 3 and press [-] to get back to the current main
menu level by level.
Press [-] to enter menu options. It is optional to save or not to save the programming
information.
Select [Save and Exit] and press [#] to save system programming data, exit menu
programming, and reset system.
Installation Guide
AMAX panel 4000 / AMAX panel 4000
Bosch Sicherheitssysteme GmbH
EN