Hitachi PC-ARF Technical Catalogue page 80

4 Individual remote controls
PC-ARF

When Using Switch Box
a. Prepare field-supplied Implanted Switch Box
There are different types of electrical boxes available on the market that can
be used for this installation, for example:
• Electrical box for one control unit (with or without cover.)
• Electrical box for 2 control units (with or without cover.)
• Other types of box
b. Lead the cable through the conduit tube in the wall.
c. Peel the insulation at the end of the cable and clamp the M3 solderless terminals (field-supplied).
3 Attach the remote control switch to the holding bracket. Be careful not to pinch the cable when attaching it.
4 Remove the protection film from the liquid crystal display.
64
TCGB0106 rev.0 - 12/2014
Implanted switch box
(JIS Box) for 2 switches
M4 screws
(field-supplied)
Connect the terminals
Remove the protection film
(JIS Box). (JIS C 8336-1988)
Implanted switch box
(JIS Box) for 1 switch