Menu - Hitachi PC-ARF Technical Catalogue

5 Centralised remote controls
PSC-A32MN

5.2.4.3 Menu

The table below shows the menu items and their functions.
Item
This function is used for turning off the filter sign display of indoor units in which filter sign has occurred.
Filter Sign Reset
Regardless of the occurrence of the filter sign, it is also possible to reset the display time of the filter sign in
the air conditioner units.
This function is used to start and stop the operation of air conditioners at the desired time.
Schedule Setting
It is possible to set the schedule in block and group units.
This function is used for setting the time (by the minute), "Run/Stop" and temperature (19~30 oC).
Schedule Timer
For weekly schedule setting, up to 10 schedule items can be set per day.
Setting
It is also possible to copy the setting contents.
This function is used for suspending the schedule operation temporarily.
Holiday Setting Scheduled operation remains suspended when the day is set as holiday.
This function is used for setting irregular holidays such as national holidays.
"Schedule Timer OFF Setting" is used for suspending scheduled operation for the target group.
Schedule Timer
Scheduled operation remains suspended when Schedule Timer is OFF.
ON/OFF Setting
This function is used for long holidays, sudden holidays, national holidays, etc.
This function is used for limiting the setting temperature range of the remote control.
Adjusting Remote Con-
trol Switch Setting Tem-
It is possible to define a minimum setting temperature for cooling and a maximum setting temperature for
perature Range
heating.
Adjusting Date/Time This function is used for adjusting date and time.
This function is used when cleaning the LCD screen of the central station.
Touchscreen Cleaning
The screen returns to "Menu" when it is not tapped for 10 seconds.
This function is used for calibrating (correcting) the recognition position of the touchscreen of the control.
Touchscreen Calibration
This function shall be used when there is a continued lack of response to the press of the buttons dis-
played on the screen.
This function is used for registering the names of blocks and groups.
The maximum length allowed for the name of each block or group is of 16 characters. It is also possible to
Group Name Register
copy names
If a group or block is registered without a name, it is registered as "Group 1" or "Block 1" automatically.
Screen Display Setting These functions are used for adjusting settings related with the screen display.
Brightness This function is used for adjusting the brightness of the touchscreen display.
Language Setting This function is used for changing the display language.
Temperature Unit This function is used for changing the temperature unit.
This function is used for indicating the accumulated operation time of the air conditioner.
•
Accumulated
Operation Time
•
•
Contact Information This function is used for displaying the service contact address and the latest alarm code.
327
TCGB0106 rev.0 - 12/2014
The value of accumulated operation time is displayed by month.
The operation time is displayed for 16 months, including the current month.
It is also possible to display "Thermo ON time" by setting the appropriate controller option.
Function
5