Hitachi PC-ARF Technical Catalogue page 368

5 Centralised remote controls
PSC-A32MN
Air Conditioner Remote Control Settings
1 Select "Optional Function Setting" on the "Service Menu" screen when the air conditioners are not in operation.
2 Select "Remote control setting" on the Menu screen.
Selection is not possible when one or more air conditioners are in operation.
•
(1)
3 Select the target of Optional Function (All Groups/
Block/Group).
4 Enable or disable each of the function items. The
selected setting appears highlighted in yellow.
5 Tap "Setting completed" to confirm the set con-
tents and return to the Menu screen of the target
group.
6 Tap "Cancel" to cancel the set contents and return
to the Optional Function target selection screen.
* Depending on the unit, the set contents may not
apply. Please check the Installation and Operation
Manual and the Instruction Manual of each indoor
unit or remote control for more details.
Controller Setting
1 Select "Optional Function Setting" on the "Service Menu" screen when the air conditioners are not in operation.
2 Select "Controller setting" on the "Optional Function Setting" screen.
(1)
3 Select the setting of each of the function items as necessary. The selected setting appears highlighted in yellow.
About OFF time Remote control prohibition
• When it is enabled, it is not possible to set remote operation prohibition (for individual items). When setting as Enable,
the Remote Operation Prohibited (by item) cannot be set. The Remote Operation Prohibited (by item) can do setting
but, if operating simultaneously with other controllers then do not do setting.
• When All groups have Remote Operation permitted (all items) only, It is possible to switch "Enable" ↔ "Disable".
352
TCGB0106 rev.0 - 12/2014
(2)
(2)
(5)
(3)