Operation Mode (Cooling, Heating, Dry, Automatic Cooling/Heating And Fan Operation) - Hitachi PC-ARF Technical Catalogue

4 Individual remote controls
PC-LH3(A/B)

Stop Operation
Point the transmitter towards the receiver kit and press "RUN/STOP" switch again. The RUN indicator (red) on receiver is
turned OFF and the operation is stopped.
The indications of setting temperature, fan speed and air flow angle are turned OFF.
N O T E
After the heating operation is stopped, the fan mode may be operated for approximately 2 minutes.

4.4.4.2 Operation Mode (Cooling, Heating, Dry, Automatic Cooling/Heating and Fan Operation)


Function
• Cooling operation (COOL): to decrease the room temperature.
• Heating operation (HEAT): to increase the room temperature.
• Dry operation (DRY): to decrease the humidity in the room.
• Automatic cooling/heating operation (AUTO): to cooling and heating automatic changeover.
• Fan operation (FAN): to circulate the air in the room.
N O T E
The recommendable set temperature is as follows;
* Cooling operation: 27 to 29 ºC
* Heating operation: 18 to 20 ºC
* Dry operation: 23 to 25 ºC
177
TCGB0106 rev.0 - 12/2014
COOL
4