Hitachi PC-ARF Technical Catalogue page 265

5 Centralised remote controls
PSC-A64GT

Permitting/Prohibiting Operation from Remote Control Switch
This function is used for prohibiting the operation from the remote control switch.
While operation is prohibited, "Central Control" is indicated on LCD of remote control switch and operating by the remote
control switch is not available.
1 Select the target group at the screen of "Monitor 1 (All Groups)" or "Monitor 2 (Block)" to set the function of "RCS
Operation Prohibited" setting. The pop-up of "Setting" for the selected group is displayed on the touchscreen.
Monitor 1 (All Groups)
Monitor 1 (All Groups)
F-Level F-Level
1-A 1-B
Group1A-01 Group1A-02 Group1B-01 Group1B-02
Group1A-03 Group1A-04 Group1B-03 Group1B-04
Group1A-05 Group1A-06 Group1B-05 Group1B-06
Group1A-07 Group1A-08 Group1B-07 Group1B-08
Group1A-09 Group1A-10 Group1B-09 Group1B-10
Group1A-11 Group1A-12 Group1B-11 Group1B-12
Group1A-13 Group1A-14 Group1B-13
Group1A-15 Group1A-16
Menu
2 Select "RCS Operation Prohibited" by tapping.
3 Select "RCS Operation Prohibited" or "RCS Operation Permitted". If "RCS Operation Prohibited" is selected, the icon
" " will be indicated in "Setting" pop-up.
4 Tap "Close" to return to the screen of "Monitor 1 (All Groups)" or "Monitor 2 (Block)".
F-Level 1-A
Setting
Group1A-02
Operation
Setting
RUN/STOP OPE. MODE FAN SPEED LOUVER
RUN
DRY LOW
STOP
N O T E
• In the case of "Run/Stop Only" mode, setting change is available by only "All Groups Setting" or "Setting by Block" button.
• If the unit is started from the central station (by tapping "Run" on the central station), it can be stopped from the remote control switch
(by pressing "Stop" on the remote control switch) even while the operation from the remote control switch is prohibited. In this case,
press "Run" on the remote control switch to start the operation again. However, this method is for an emergency stop therefore do not
use this for the normal operation.
• For the unit without the remote control switch, the prohibiting operation should be set.
• Do not set the prohibiting operation if multiple centralised controllers are used in the same H-LINK. Additionally, do not set this by other
centralised controller or it may cause malfunction.
249
TCGB0106 rev.0 - 12/2014
25/01/2010 (Mon) 10:20
F-Level
Annex
2
Buffet 1 Buffet 1
Group2-01 Group2-02
North Area South Area
Buffet 1 Buffet 1
Group2-03 Group2-04
East Area West Area
Buffet 2 Buffet 2
Group2-05 Group2-06
North Area South Area
Buffet 2 Buffet 2
Group2-07 Group2-08
East Area West Area
Meeting Meeting
Group2-09 Group2-10
Room A Room B
Meeting Meeting
Group2-11
Room C Room D
Meeting
Kiosk
Room E
All Groups All Groups All Groups
Setting Run Stop
(1)
(2)
RCS Operation
Prohibited
SET TEMP.
26
AUTO
Close
Monitor 2 (Block)
Monitor 2 (Block)
F-Level F-Level
All Groups
1-A 1-B
26 26
Group1A-01 Group1A-02
DRY LOW DRY LOW
AUTO AUTO
24 24
Group1A-05 Group1A-06
DRY LOW DRY
LOW
AUTO
20 20
Group1A-09 Group1A-10
DRY LOW DRY
LOW
22 20
Group1A-13 Group1A-14
DRY LOW DRY LOW
Menu
(1)
(3)
F-Level 1-A
Setting
Group1A-02
Operation
Setting
RCS Operation
Permitted
25/01/2010 (Mon) 10:20
F-Level
Annex
2
20 25
Group1A-03 Group1A-04
DRY LOW DRY LOW
26 26
Group1A-07 Group1A-08
DRY DRY
LOW LOW
26 23
Group1A-11 Group1A-12
DRY DRY
LOW LOW
AUTO
19 22
Group1A-15 Group1A-16
DRY LOW DRY LOW
Setting by Run by Stop by
Block Block Block
Icon
RCS Operation
Prohibited
RCS Operation
Prohibited
Close
(4)
5