8 Control support devices
PC-A1IO
8.3 PC-A1IO
8.3.1 Safety summary
C A U T I O N
•
Do not connect voltage input to the control system before installation is correctly done.
•
Read this manual carefully before performing installation work.
•
Read this manual in order to configure the PC-A1IO
•
This appliance must be used only by adult and capable people, having received the technical information or instructions to handle
properly and safely this appliance.
•
Children should be supervised to ensure that they do not play with the appliance.
N O T E
Do not install PC-A1IO in places... :
•
with vapour, oil or dispersed liquids.
•
with heat sources nearby (sulphuric surroundings).
•
where accumulation, generation or leaks of inflammable gases has been detected.
•
that are near the sea, in saline, acid or alkaline surroundings.
•
Install PC-A1IO away from possible sources of electromagnetic waves.
•
Respect local electrical standards.
•
Use a power circuit that is not subject to peak demands.
•
Ensure that there is enough free space around the PC-A1IO (see figure) so that the heat may dissipate adequately (refer to "Instal-
lation Work").
•
If you install the PC-A1IO in vertical position, install the power supply in the lower part and the temperature control outputs in the up-
per part.
718
TCGB0106 rev.0 - 12/2014