Hitachi PC-ARF Technical Catalogue page 525

6 Building air conditioning controls
CSNET WEB (PSC-A160WEB1)
Virtual remote control
Once the user is connected, it will appear an interface that looks like a remote control.
This interface is equivalent to the building layout one with few improvements that helps to be a central control.
The controllable things will be Run/Stop, setting temperature, mode, fan, louver and central. They are exactly as the Build-
ing layout remote control. It is possible to find more information on
In case of central it will be enabled only if installer gives privileges to the user to control this, and when one central value is
activated the buttons corresponding to that lockage will be disabled.
Log out will return to the login window, and exit will close the application.
Units list and state
The combo box on the upper part will be used to select between units if there are more than one. The displayed text will be
the location field stored on the HARC. If this text does not exist, it will write "Unit: [X,Y,Z]" knowing that values as the slot,
outdoor address and indoor address of the unit.
Different colours on the combo box will give information about if unit is running or not, and if there is a unit with an alarm.
The colours meaning is explained on the following table:
509 509
TCGB0106 rev.0 - 12/2014
Building Layout
Colour Meaning
Green Running
Black Stopped
Red Alarm
chapter.
6