Operation Mode Selection Procedure - Hitachi PC-ARF Technical Catalogue

4 Individual remote controls
PC-ARF

4.1.4.3 Operation mode selection procedure


Procedure for operation in cooling, heating, dry, cooling/heating automatic and air flow operation
modes
Function
• Cooling Operation (COOL): To decrease the room temperature.
• Heating Operation (HEAT): To increase the room temperature.
• Dry Operation (DRY): To decrease the humidity in the room.
• Cooling/Heating Automatic Operation (AUTO): To cooling and heating automatic changeover.
• Air Flow Operation (FAN): To circulate the air in the room.
N O T E
The available set temperature is as follows:
• Cooling Operation: 19 to 30 ºC
• Heating Operation: 17 to 30 ºC
• Dry Operation: 19 to 30 ºC
Mode selection
1 Turn ON the power supply.
2 Press " " or " " and select "MODE".
3 By pressing " " or " ", the operation mode will be changed as
follows.
N O T E
The advanced setting is required for the "AUTO" operation. Contact your dis-
tributor or dealer of HITACHI for detailed information.
88
TCGB0106 rev.0 - 12/2014
Connecting
Meeting Room
A/C
MODE SPEED
COOL
HIGH
OK
SPEED
FAN
AUTO
DRY
HEAT
COOL
Meeting Room
A/C
MODE SPEED
HEAT
HIGH
OK
SPEED
TEMP
ADJ
TEMP
ADJ