Dimension Data; Installation Space; Installation Procedure - Hitachi PC-ARF Technical Catalogue

4 Individual remote controls
PC-ARH

4.3.2.4 Dimension data

4.3.2.5 Installation space

In case of installing the controllers in vertical line, keep a distance more than 50 mm
between the controllers vertically. If the distance is insufficient, the controller can not
be taken out.

4.3.2.6 Installation procedure

1 Insert the end of the screwdriver into the indents on the bottom of
the bracket, push and rotate the screwdriver to remove the remote
from the bracket.
Unscrew the base to release the bracket
2 Cable connection.
Connect and solder the accessory cable to the cable supplied with
the unit. Insulate the contact area with vinyl tape.
161
TCGB0106 rev.0 - 12/2014
70 10
15
Field supply cable
(mm)
Accessory cable
Connection part
4