Hmi Devices; Communications Processor Cp1543-1 - Siemens SIMATIC S7-1500 System Manual

Redundant system
Hide thumbs Also See for SIMATIC S7-1500:
Table of Contents

Advertisement

System overview
5.4 Communication
5.4.3

HMI devices

HMI devices are used for machine-level process visualization and control. You use the same
HMI devices for the S7-1500R/H redundant system as for the standard S7-1500 system.
Using HMI communication, one or more HMI devices exchange data with the CPUs . Examples
of HMI devices are HMI Basic/Comfort/Mobile Panel.
The connection of the HMI device to the redundant system depends on the specific
application. In STEP 7, you can configure the following communication options:
• The HMI device communicates with the redundant system via a system IP address.
• The HMI device communicates with the respective R/H-CPUs (for example for diagnostic
purposes) via device IP addresses.
More information
You can find more information on using HMI devices in the Using HMI devices (Page 228)
section and in the Communication Function Manual
(https://support.industry.siemens.com/cs/ww/en/view/59192925).
You can find an overview of all available HMI devices in the Industry Mall
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/9109999?tree=CatalogTree)
.
5.4.4

Communications processor CP1543-1

The communications processor CP 1543-1 provides a redundant connection of the
S7-1500 R/H CPUs to Industrial Ethernet.
You can use up to 2 (R-System)/6 (H-System) CP 1543-1 communications processors per
R/H-CPU.
The table below gives an overview of the most important properties and communication
services of the CP 1543-1:
Short designation
Article number
Equipment Manual
Bus system
Hardware interface
Data transmission rate
Functionality and protocols
Diagnostics interrupt
Hardware interrupt
Isochronous mode
OPC UA PubSub via UDP
Virtual interface
122
CP 1543-1
6GK7543-1AX00-0XE0
Industrial Ethernet
RJ45
10/100/1000 Mbps
TCP/IP, ISO, UDP, TCP, S7 communication, IP Broad-
cast/Multicast, Security, Secure Open User Communication,
SMTPS, diagnostics SNMPV1/V3, FTP client/server, email,
IPV4
X
---
---
---
W1 (via R/H CPUs)
System Manual, 01/2024, A5E41814787-AF
S7-1500R/H redundant system

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic s7-1500r/h

Table of Contents