Line Position Pattern - Siemens SINUMERIK 840D Operation/Programming Manual

3
Programming with ShopMill
3.7 Drilling

3.7.10 Line position pattern

Select with softkey
Call help display with
the key
Parameters
Z0 Height of workpiece (abs. or inc.)
This position must be programmed absolutely in the first call.
X0 Reference point (first position)
This position must be programmed absolutely in the first call.
Y0 Reference point (first position)
This position must be programmed absolutely in the first call.
α0
Angle of rotation of line in relation to the X axis.
Positive angle:
Negative angle: Line is rotated clockwise.
L Position spacing.
N Number of positions.
3-250
You can use this function to program any number of positions spaced
at the same distance along a line.
Positions >
Position the cursor in the "Line/matrix/box" field. With the "Alternat."
softkey you can select the "Line" position pattern.
Help display for "Line"
Description
Line is rotated counterclockwise.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
3
10.04
Unit
mm
mm
mm
Degr.
mm
 Siemens AG, 2004. All rights reserved