Block Search To A Position Pattern For Shopmill Programs - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Block search to a position pattern for ShopMill programs

For ShopMill programs, you have the possibility of performing a block search on the position

pattern. You define the technology with which you wish to start - as well as the number of the

starting hole.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Select the "Machine" operating area.

Press the <AUTO> key.

Press the "Block search" and "Block search mode" softkeys.

The "Search Mode" window opens.

Software option

You require the "ShopMill/ShopTurn" option for the block search for ShopMill

machining step programs.

Machine manufacturer

Please observe the information provided by the machine manufacturer.

The required ShopMill program is in the block display.

Press the "Block search" softkey.

Position the cursor to the position block.

Press the "Start search" softkey.

The "Block search" window opens.

All of the technologies used in the program are listed.

Select the required technology and press the "OK" softkey

The selected technology is displayed in the "Search" window.

Machining the workpiece

6.7 Starting machining at a specific point