Siemens SINUMERIK 840D Operation/Programming Manual page 165

2
10.04
Coordinate
transformations
Program
Scale
Mirror
Total offset
Total
Additional
axes
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
The active coordinates of the "Offset" transformation are displayed as
well as the angle set in the "Rotation" transformation by which the
coordinate system rotates.
You cannot edit these values here.
The active scaling factor for the "Scaling" transformation is displayed
for the respective axis.
You cannot edit these values here.
The mirror axis that was defined by means of the "Mirroring"
transformation is displayed.
You cannot edit these values here.
The total offset resulting from the base offset and all active work
offsets and coordinate transformations appears.
With the "Additional axes" softkey, you can display two additional
rotary axes and determine their offset. These additional axes must be
activated via machine data.
Please refer to the machine manufacturer's instructions.
Press the "Work offset" softkey in the "Tools WOs" operating
area.
The work offset list appears.
Operation
2.14 Work offsets
2
2-165