5
Simulation
5.6 Three-dimensional display
5.6
Three-dimensional display
Volume model
5-336
The workpiece is displayed as a volume model. The simulation
window displays the current machining status.
You can display concealed contours and views on the volume model
by
• changing the position about the vertical axis or
• cutting a section out of the volume model at the desired point.
Press the "Volume model".
The volume model of the current workpiece is displayed.
Example of a volume model:
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
5
10.04
Siemens AG, 2004. All rights reserved