Siemens SINUMERIK 840D Operation/Programming Manual page 284

3
Programming with ShopMill
3.8 Milling
Programming example 1
3-284
You want to mill 12 mutually parallel rectangular pockets at an angle of 15
degrees. Arrangement on matrix: 4 columns, 3 rows.
Blank dimensions: X=115mm, Y=80mm, Z=30mm
Rectangular pocket dimensions: Length 20 mm, width 10 mm, depth 8 mm
Corner radius 1.5mm.
You have selected "Bottom left" as the pocket reference point.
Parameter input fields for rectangular pocket and position pattern
Programming graphic, rectangular pockets on matrix at angle of 15 degrees
Extract from machining plan; milling rectangular pockets on a matrix
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
3
10.04
 Siemens AG, 2004. All rights reserved