9
Examples
9.2 Example 2: Translation and mirroring of a contour
9.2
Example 2: Translation and mirroring of a contour
Workshop drawing
Program Part_1
1. Program header
2. Set start marker for
repetition of the contour
3. Define the contour
9-426
Y+
10
50
120
In this example, the shapes shown recur in the same program. Both
mirroring and translation operations are required. The shapes will be
machined with a stock removal cycle.
• Define the blank:
Corner point: X0 0 abs
Dimensions: L 120
• Press the
• Select via the
• Set start marking with "Marker1"
•
• Select via the
• Enter the contour name (here: PART_1_3CORNER) and confirm
• Fill out the start screen form for the contour
Tool axis Z
X 10 abs
and confirm with
• Enter the following contour elements and confirm each one by
pressing the
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
X+
Y0 0 abs
Z0 2 abs
W 60
H -30
softkey.
Set
marker
>
softkeys
New
softkeys
contour
>
Y 10 abs
.
softkey:
Siemens AG, 2004. All rights reserved
9
10.04
Y+
Z+
10
30