Siemens SINUMERIK 840D Operation/Programming Manual page 322

4
Programming with G Code
4.2 Running a G code program
Running a G code
program
-or-
Execute
Cycle Start
4-322
Press the "Program" softkey or the "Program Manager" key.
-and-
Position the cursor on the desired G code program.
-and-
Press the "Execute" softkey.
-or-
Press the "Execute" softkey if you are in the "Program" operating
area.
ShopMill automatically changes to "Machine Auto" operating mode
and loads the G code program.
Press the "Cycle Start" key.
Execution of the G code program starts on the machine.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
4
10.04
 Siemens AG, 2004. All rights reserved