Siemens LMV5 Series Technical Instructions page 14

Technical Instructions
Document No. LV5-1000
Valve Actuator Assemblies – Qty (1) Required if Using FGR
Pre-built FGR valve actuator assemblies are available to mount an SQM45... or SQM48...
actuator to a high-temperature VKF... butterfly valve. The most commonly used assemblies are
listed below. For a list of all assembly options, see Document No. VA-3000. For more
information on VKF valves, refer to Document No. CVLV-1000. Contact SCC if an FGR valve
actuator assembly larger than 8" is required.
VA48.4-3.0VKF-HT
VA48.4-4.0VKF-HT
VA48.4-6.0VKF-HT
VA48.4-8.0VKF-HT
Special cable is used to connect the actuators and O
purchased in 100' or 500' rolls.
AGG5.643(100)
AGG5.643
Electrical Cable Cord Grips and Conduit Adapters – Qty (2) Required Per Actuator
SQM45..., SQM48..., and SQM91... actuators come with two M16 threaded electrical
connections. Various adapters are available to convert these connections to an English thread.
One short and one long adapter are recommended per actuator to offset conduit connections.
ADP-
M16XE500(5)
ADP-M16XE500-
LONG(5)
7466201040
7466200470
Section 1
FGR Control Valve
SQM48 to 3" high-temp VKF valve assembly
SQM48 to 4" high-temp VKF valve assembly
SQM48 to 6" high-temp VKF valve assembly
SQM48 to 8" high-temp VKF valve assembly
Actuator Accessories
CANbus Cable – Qty (1) Required
module to the LMV5. This cable may be
2
100' roll of CANbus cable
500' roll of CANbus cable
5-pack of short M16 to 1/2" NPSM metal conduit
adapters, compatible with liquid tight or EMT fittings
5 pack of long M16 to 1/2" NPSM metal conduit
adapters, compatible with liquid tight or EMT fittings
M16 to 1/2" NPSM nylon conduit adapter,
compatible with liquid tight or EMT conduit fittings
M16 nylon cord grip
Page 10
HOME
LMV Series
SCC Inc.