Oem Password - Siemens LMV5 Series Technical Instructions

LMV Series
LEGEND - Password Access: (U)=User, (S)=Service, (O)=OEM, Shaded = Commonly Used, ** = Must Set, X = Has Function, / = Partial Function
Menu Path Parameter
Curr Flow Rate (U)
Volume Gas (U)
Volume Oil (U)
Params & Display>
Fuel Meter Volume Gas R (U)
Volume Oil R (U)
Reset DateGas (U)
Reset DateOil (U)
ServicePassword (O)
Updating>
Passwords
OEM Password (O)
BurnerID (O)**
Updating
TimeOfDay (U)
BU included? (U)
AZL included? (U)
LC included? (U)
ACT1 included? (U)
Updating>
ParamsBackup>
ACT2 included? (U)
BackupInfo
ACT3 included? (U)
ACT4 included? (U)
ACT5 included? (U)
ACT6 included? (U)
VSD included? (U)
O2 included? (U)
SCC Inc.
Default Range
Read Only
Read Only
Reset Only
Read Only
3 to 8
9876
characters
4 to 8
START
characters
4 to 15
Not Set
characters
Date (U)
Read Only
Current flow rate for the fuel being fired. Gas = cubic meters or cubic feet per hour. Oil =
liters or gallons per hour.
Totalized volume of gas used since the last reset.
Totalized volume of oil used since the last reset.
Resets the totalized volume of gas.
Resets the totalized volume of oil.
This displays the date of the last reset for gas.
This displays the date of the last reset for oil.
The service level password can be changed here.
The OEM level password can be changed here.
Burner ID must be set here. Typically the burner / boiler serial number is used. Serves as an
identifier for the parameter set.
This displays the date of the last backup.
This displays the time of day of the last backup.
This states if the basic unit (LMV5) was included in the last backup.
This states if the AZL was included in the last backup.
This states if the LC (load controller) was included in the last backup.
This states if the Act 1 (Actuator 1) was included in the last backup.
This states if the Act 2 (Actuator 2) was included in the last backup.
This states if the Act 3 (Actuator 3) was included in the last backup.
This states if the Act 4 (Actuator 4) was included in the last backup.
This states if the Act 5 (Actuator 5) was included in the last backup.
This states if the Act 6 (Actuator 6) was included in the last backup.
This states if the VSD (Variable Speed Drive) was included in the last backup.
This states if the O2 module was included in the last backup.
Page 45
HOME P - LIST
Description
Technical Instructions
LV5-1000
LMV
x x
x x
x x
x x
x x
x x
x x
x x x
x x x
x x x
x x x
x x x
x x x
x x x
x x x
x x x
x x x
x x x
x x x
x x
x x
x x
x x
Section 3