Display Machine Data; Acceptance Report - Siemens SINUMERIK 840DE sl Commissioning Manual

11/2006
4.2.6

Display machine data

4.2.7

Acceptance report

© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
NCK Reset
If no tool management is available:
Create and load the configuration file for
the tool management (see chap. 8.3.3
"Creating and loading the configuration
file").
Transfer data from the directory
\ShopMill_Turn of the toolbox as an
example.
Fig. 4-5 NCK SINUMERIK 840D sl installation and startup
After the installation of ShopMill on the PCU and the startup of NCK and PLC
are completed, you still have to adapt the display machine data.
The display machine data are listed in Section 7.2 "Display Machine Data for
ShopMill".
The acceptance certificate can be used to test the installed ShopMill functions
once the ShopMill installation and startup have been completed.
The acceptance certificate is included on the ShopMill CD–ROM.
4 Commissioning
4.2 Initial start–up
2
J
4-25