Signals From Shopmill (Output Signals) - Siemens SINUMERIK 840DE sl Commissioning Manual

11/2006
Address
DB82
DBX
11.5 CMM_IN.drf_request
Select the function DRF
12 CMM_IN.ext_m_cmd_1
1st expanded M function to output tool–spe-
cific functions
13 CMM_IN.ext_m_cmd_2
2nd expanded M function to output tool–spe-
cific functions
6.3.2

Signals from ShopMill (output signals)

Table 6-2 Signals from ShopMill (output signals)
Address
DB82
DBX
30.0 CMM_OUT.base_sig.main_mode_mill.manual
ShopMill manual mode
30.1 CMM_OUT.base_sig.main_mode_mill.auto -
matic
ShopMill automatic mode
32.0 CMM_OUT.base_sig.reset
Reset performed
32.1 CMM_OUT.base_sig.nc_cycle_activ
Cycle active
32.2 CMM_OUT.base_sig.nc_cycle_activ
Cycle interrupted
34.0 CMM_OUT.sub_mode_mill.tool
Operating area – Tool is selected
34.1 CMM_OUT.sub_mode_mill.directory
Operating area – Directory is selected
34.2 CMM_OUT.sub_mode_mill.messages
Operating area – Alarms / Messages is se-
lected
34.3 CMM_OUT.sub_mode_mill.program
Operating area – Program is selected
34.7 CMM_OUT.sub_mode_mill.mda
Operating area – MDA is selected
36.0 CMM_OUT.cmm_plc_activ
ShopMill PLC active
36.1 CMM_OUT.cmm_mmc_activ
ShopMill user interface active
36.2 CMM_OUT.spindle_start_req
Spindle start requested (M3/M4 output to
spindle)
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Name
Comments
Name
Comments
6.3 Overview of the former ShopMill interface
Spares
MMC –> PLC DB21.DBX24.3
PLC –> NCK DB21.DBX0.3
Connect as in the PLC user program.
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Omitted since ShopMill PLC no longer exists
(see also display MD 9739 to 9746)
Spares
Transfer is via FC19/FC24 to the standard inter-
face DB11.DBX6.2 JOG
Transfer is via FC19/FC24 to the standard inter-
face DB11.DBX6.0 AUTO
Can be simulated with the interface signal
DB21.DBX35.7 channel status reset
Transfer is via FC19/FC24 to the standard inter-
face DB21.DBX
Transfer is via FC19/FC24 to the standard inter-
face DB21.DBX
Standard interface signal
DB19.DBB21 = 205
Standard interface signal
DB19.DBB21 = 202
Standard interface signal
DB19.DBB21 = 204
Standard interface signal
DB19.DBB21 = 203
Transfer is via FC19/FC24 to the standard inter-
face DB11.DBX6.1 MDA
Omitted since ShopMill PLC no longer exists
ShopMill Open (PCU 50.3):
is not being analyzed
ShopMill on NCU (HMI Embedded):
DB19.DBB21
Standard interface DB3x.DB64.6 and
DB3x.DB64.7
6 Signal Description
6-35