Machine and setting data
9.3 Displaying/editing display machine data
9.3
Displaying/editing display machine data
You can access the display machine data via the user interface in the "Startup" operating
area.
Procedure
46
1.
Select the "Startup" operating area.
2.
Press the "Mach. data" softkey.
3.
Press the menu forward key.
Further softkeys are displayed.
4.
Press the "Display MD" softkey.
The display machine data appears.
You will find additional display machine data in the various areas of the
machine and setting data.
5.
Position the cursor on the entry to be modified and enter the required
value.
6.
Press the "Reset (po)" softkey.
A safety prompt appears.
7.
Press the "OK" softkey to trigger a warm restart.
- OR -
Press the "Cancel" softkey if you do not want to apply the settings.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)