Siemens SINUMERIK 840DE sl Commissioning Manual page 84

8 Tool Management
8.3 Startup in NCK
Variable
description
Magazine data
$TC_MAP1
Magazine data
$TC_MAP3
Magazine data
$TC_MAP6
Magazine data
$TC_MAP7
8-84
;2nd loading station
$TC_MPP1 [9999.2]=7
$TC_MPP2 [9999,2]=0
$TC_MPP3 [9999,2]=0
$TC_MPP4 [9999,2]=2
$TC_MPP5 [9999,2]=2
;Distances between load points/buffers and real ;magazine
;–––––––––––––––––––––––––––––––––––––––––––––––––––––
$TC_MDP2 [1,1]=0
$TC_MDP2 [1,2]=0
$TC_MDP2 [1,3]=0
$TC_MDP1 [1,1]=0
$TC_MDP1 [1,2]=0
M17
The main variables for the configuration file are described here. For a detailed
description of the system variables, please refer to:
References: /FBW/, Description of Tool Management Functions
$TC_MAP1[MagazineNo]= Magazine type
S
1: Chain
S
3: Revolver
S
5: Flat magazine
S
7: Internal magazine tool buffer
S
9: Internal magazine loading station
$TC_MAP3[MagazineNo]= Magazine status
Bit mask (specification applies for bit=1):
S
Bit 0: Active magazine
S
Bit 1: Blocked
S
Bit 2: Magazine is at load position
S
Bit 3: Tool motion is active
S
Bit 4: Enabled for loading
Default = 17 means: Active magazine, enabled for loading
Number of magazines (in this case: 1)
Number of locations,
e.g. number of buffer locations: 3 = 1 spindle and 2 grippers
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
; Location type (7: Loading point)
; Location type
; Consider adjacent location
; Location status (2: Location free)
; Location type index (2: location no. 2)
; Spindle
; Gripper 1
; Gripper 2
; 1st loading point
; 2nd loading point
© Siemens AG 2006 All Rights Reserved
11/2006