Siemens SINUMERIK 840DE sl Commissioning Manual page 58

7 Machine Data
7.2 Display machine data for ShopMill
9673
MD number
Default setting: 1
Change becomes effective after: POWER ON
Data type: BYTE
Significance:
9674
MD number
Default setting: 1
Change becomes effective after: POWER ON
Data type: BYTE
Significance:
9675
MD number
Default setting: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9680
MD number
Default setting: 8
Change becomes effective after: IMMEDIATELY
Data type: WORD
Significance:
9681
MD number
Default setting: 7
Change becomes effective after: IMMEDIATELY
Data type: WORD
Significance:
7-58
$MM_CMM_TOOL_LOAD_STATION
Number of loading point
Min. input limit: 1
Protection level: 3/4
This MD is used to stipulate the loading point at which the magazine and the spindle are
loaded and unloaded. (The magazine and the spindle are always loaded/unloaded at the
same loading point.)
1 = Loading point 1
2 = Loading point 2
$MM_CMM_ENABLE_T OOL_MAGAZINE
Display of magazine list
Min. input limit: 0
Protection level: 3/4
0 = Magazine list is not displayed
1 = Magazine list is displayed
$MM_CMM_CUSTOMER_START_PICTURE
Customized boot screen
Min. input limit: 0
Protection level: 3/4
The customized boot screen is activated as follows:
0 = Siemens boot screen
1 = Customized boot screen
$MM_CMM_M_CODE_COOLANT_I
M function coolant I
Min. input limit: 0
Protection level: 3/4
This MD is used to stipulate the M function for coolant I; this is output when the tool is
changed.
$MM_CMM_M_CODE_COOLANT_II
M function coolant II
Min. input limit: 0
Protection level: 3/4
This MD is used to stipulate the M function for coolant II; this is output when the tool is
changed.
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Max. input limit: 2
Units: –
Valid as of software version
ShopMill 4.4
Max. input limit: 1
Units: –
Valid as of software version
ShopMill 4.4
Max. input limit: 1
Units: –
Valid as of software version
ShopMill 5.1
Max. input limit: 32767
Units: –
Valid as of software version
ShopMill 5.1
Max. input limit: 32767
Units: –
Valid as of software version
ShopMill 5.1
© Siemens AG 2006 All Rights Reserved
11/2006