Contents - Siemens SINUMERIK 840DE sl Commissioning Manual

®
SINUMERIK documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" columns.
Status code in the "Remarks" column:
A . . . . . New documentation.
B . . . . . Unrevised reprint with new Order No.
C . . . . . Revised edition with new status.
Edition Order No.
10/1997 6FC5 297–2AD80–0BP0
11/1998 6FC5 297–2AD80–0BP1
03/1999 6FC5 297–5AD80–0BP0
08/2000 6FC5 297–5AD80–0BP1
12/2001 6FC5 297–6AD80–0BP0
08/2003 6FC5 297–6AD80–0BP1
11/2003 6FC5 297–6AD80–0BP2
02/2005 6FC5 297–6AD80–0BP3
08/2005 6FC5 397–4AP10–0BA0
11/2006 6FC5 397–4AP10–1BA0
Further information is available in the Internet under:
http://www.siemens.com/motioncontrol
This publication was produced with Interleaf V 7
©
Siemens AG 2006
Order No. 6FC5 397–4AP10–1BA0
Printed in the Federal Republic of Germany
Remarks
A
C
C
C
C
C
C
C
C
C
Other functions not described in this documentation might be
executable in the control. However, no claim can be made regarding
the availability of these functions when the equipment is first supplied
or in the event of servicing.
We have checked that the contents of this document correspond to
the hardware and software described. Nevertheless, differences
might exist and therefore we cannot guarantee that they are
completely identical. The data in this document is regularly checked
and the necessary corrections are included in the following editions.
Suggestions for improvement are also welcome.
Subject to change without prior notice.
Siemens–Aktiengesellschaft