Automatically Generated Programs - Siemens SINUMERIK 840DE sl Commissioning Manual

11/2006
11.5

Automatically generated programs

CMM_SINGLE
INPUT_DATA_MM
INPUT_DATA_IN
REM_DATA.TRC
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
ShopMill creates several programs automatically during operation.
Directory of part programs:
The program is created when a function is executed in "Manual" mode.
The program is started via an asynchronous subroutine.
The last parameter values entered in a screen are saved in these programs,
depending on the unit of measurement. (INPUT_DATA_MM = values with the
unit "mm"; INPUT_DATA_IN = values with the unit "Inch")
Directory startup:
Data which needs to remain stored when the machine is next switched off (e.g.
the last selected program) is saved in this program.
11.5 Automatically generated programs
11 Miscellaneous
11-169