Commissioning - Siemens SINUMERIK 840DE sl Commissioning Manual

Commissioning

4.1 Prerequisites
Data transfer
ShopMill
software
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill - - 11/2006 Edition
For data transfer you require:
Hardware
S
-- Programming device with Windows XP or PC with Ethernet
-- Memory stick, if required (Order No.: 6ES7 648--0DC20--0AA0)
S Software
-- SIMATIC Step7, version 5.3 SP2 or higher (for Order No., see SIMATIC
catalog)
ShopMill on NCU (HMI Embedded)
S
For the ShopMill variant on NCU (HMI Embedded), the software is already pre--
installed on the CompactFlash card.
S ShopMill for PCU 50.3
The required software can be found on the DVD "NCU--SysSW and ShopMill--
HMI". The procedure for installing the software on the PCU and NC/PLC can be
found in the following startup chapters.
Note
The exact contents of the DVD are located in the file
SIEMENSD.RTF (German) or SIEMENSE.RTF (English).
A compatibility list is located in the file 840D_sl_compatibility_list.xls.
4
4-17