System Functions; Installer Code Functions; Add Or Delete Rf Wireless Devices - Bosch Solution 2000 Installation Manual

Control Panel
7

System Functions

This section explains more advanced features, such as Installer Code, Master Code, and hold-
down functions that are required for testing and regular maintenance of the system.
Operations described in this chapter are based on use with the IUI–SOL–ICON codepad. For
the IUI-SOL-TEXT codepad, follow the prompts on the codepad display.
7.1

Installer Code Functions

Installer Code functions allow the installer to perform various system tests and tasks without
knowing a Master Code.
To access the required Installer Code function, enter the Installer Code and corresponding
function digit, and press [AWAY]. The Installer Code functions are listed in the table Installer
Code Functions below. You can access these functions only when the system is disarmed.
Installer Code Functions
Function
7.1.1

Add or Delete RF Wireless Devices

Notice!
The Solution 2000 control panel does not support wireless devices.
The Solution 3000 control panel can accept up to 16 wireless devices on the system. It is
possible to enroll wireless PIRs, reed switches, and smoke detectors to the control panel. This
control panel supports the following RF sensors:
–
–
–
–
–
–
–
–
–
Bosch Security Systems, Inc.
Description
0 Add/delete RF wireless devices / keyfobs / repeaters
1 Set the number of days until the first Test Report
2 Change domestic telephone numbers
3 Change the Telco arm/disarm sequence
4 Set bypass zones for STAY Mode 2
6 Turn report monitor mode on and off
7 Walk test mode
8 Event memory recall mode
9 AWAY arm/disarm
RFDW-SM
RFDW-RM
RFUN
RFPR-12
RFPR-C12
RFDL-11
RFGB
RFBT
RFSM
Installation Guide
System Functions | en 41
2017.10 | 03 | F.01U.298.026