Cross-Point Control Block - Sony DVS-9000 System User Manual

Cross-Point Control Block

In the cross-point control block, you can
select the signals to be used in this M/E
bank or PGM/PST bank.
2 Source name displays
Key row
DSK1
Background A row
1 Cross-point buttons
a Cross-point buttons
These buttons select the signals used for
video creation on this M/E bank or PGM/
PST bank. Each row of buttons corresponds
to one or more signal buses within the
switcher.
Key row: The buttons in this row select the
bus signals specified with the key row
delegation buttons ([DSK1] to [DSK4],
[DME1] to [DME4], [UTIL1], or
[UTIL2]) or delegation buttons in the
auxiliary bus control block.
3 Key row delegation buttons
DSK2 DSK3 DSK4 DME1 DME2
Background B row
Background A row: Press the desired
Background B row: Press the desired
Names and Functions of Parts of the Control Panel
4 XPT HOLD button
XPT
DME3 DME4 UTIL1 UTIL2
HOLD
The later pressed delegation button
takes precedence and the selection is
reflected in the key row.
button to select the signal as the current
background video on this M/E bank or
PGM/PST bank.
button to select the signal as the
background after the next transition on
this M/E bank or PGM/PST bank.
5 SHIFT button
SHIFT
47