Effect Editing - Sony DVS-9000 System User Manual

These conditions are called "attributes" of the effect, and can be added when
the keyframe effect is saved or recalled.
Type of attribute
The attribute that can be attached to an effect is as follows.
Effect dissolve: The transition from the state before the effect recall to the state
Temporary attributes
When a keyframe is recalled, independently of the attributes held in the
register, you can also enable or disable temporary attributes. These temporary
attributes are set when the keyframe effect is recalled.

Effect Editing

For editing operations such as to insert, delete, or modify a keyframe, it is
necessary to stop the effect at the corresponding point on the time axis. This is
termed an "edit point."
You can edit either on a keyframe within the effect, or at any point between
keyframes.
Insert: Insert the current image as a keyframe. Inserting a keyframe in an
Modify: Modify a keyframe. You can modify a single keyframe or a range of
Delete: Delete a keyframe. You can delete a single keyframe or a range of
Copy: Copy a keyframe. You can copy a single keyframe or a range of
Paste: Paste the keyframe last copied or deleted anywhere within the effect.
Pause: You can set a pause on a particular keyframe, so that when the effect is
KF Loop: Execute the effect the specified number of times through the
Undo an edit operation: Undo the effect of the last operation to insert,
622
Keyframes
at the effect start point is carried out smoothly, by a dissolve. The dissolve
duration can be set in the Effect menu.
existing effect may change the duration of the effect (see page 624).
keyframes in the effect together.
keyframes in the effect together. Deleting keyframes from an effect
reduces the duration of the effect (see page 625).
After deleting a keyframe, you can reinsert the keyframe with a paste
operation.
keyframes in the effect together.
run it pauses on this keyframe. You can make this setting on any number
of keyframes. To restart the paused effect, repeat the operation to run the
effect.
keyframes in the specified range.
modify, delete, or paste a keyframe.