Sony DVS-9000 System User Manual page 262

The following transition modes are available.
Channels
One-channel mode
Two-channel mode
a) Transition according to DME wipe patterns 1202, 1203, or 1204
b) Transition according to DME wipe pattern 1201
c) Transition according to DME wipe pattern 1251
For details, see "Overview" (page 234).
Note
For the following group of effects available in two-channel mode, no user
programmable DME wipe patterns can be created.
Notes on creating keyframe effects
When creating a keyframe effect to be used as a user programmable DME
pattern, note the following, depending on the transition mode used.
Notes on single transition mode (one-channel mode)
• Either create the first keyframe image outside the screen area, or set the
• Create the last keyframe to be a full-size image.
• In the <Transition Mode> group of the Key Frame >DME User PGM menu,
Notes on flip tumble (one-channel mode)
• Create the first keyframe image at full size. In the <Back> group of the DME
262
Creating User Programmable DME Patterns
Transition mode
Single transition mode
Flip Tumble
Frame in-out
Frame in-out H
Frame in-out V
Picture-in-picture
Compress
Dual transition mode
Two-channel picture-in-picture
Page turn, Page roll, Frame in-out, Brick
image size to zero so that it cannot be seen within the screen.
select [Single].
>Input/Output >Video/Key menu, depending on the direction of the rotation
you want during the transition, press [H Invert] or [V Invert], turning it on.
Effect group
Slide, Split, Door, Page turn,
Page roll, Squeeze, Mirror,
Sphere, Character Trail, Wave,
Ripple, 2D Trans, 3D Trans,
Sparkle, Split Slide
Flip Tumble, Mosaic, Defocus
Frame in-out
a) Frame in-out
Frame in-out
b) Picture-in-picture
c) Picture-in-picture
Slide, Squeeze, 3D Trans
Picture-in-picture