Displaying The Macro Attachment List - Sony DVS-9000 System User Manual

fader lever position where the macro attachment is set appears in the following
places.
• Transition indicator in the transition execution section: The indicator
• Transition rate indication in the transition execution section: This shows
Removing macro attachment settings
To cancel a macro attachment to a button
Hold down the [PRE MCRO] or [POST MCRO] button assigned to a utility/
shotbox control block button or user preference button, and press the
background A row button that is flashing. The button for which a macro
attachment was set stops flashing and goes off, and the setting is canceled.
To cancel a macro attachment to a fader lever
Hold down the [PRE MCRO] or [POST MCRO] button assigned to a utility/
shotbox control block or user preference button, and press the [LIMIT SET] or
[PRIOR SET] button in the control block containing the fader lever having the
macro attachment set.
To remove all macro attachment settings in a single operation
You can remove all macro attachment settings in a single operation.
1
2
3

Displaying the Macro Attachment List

In the Macro >Attachment menu, you can display the macro attachment list to
check the macro attachment settings.
The macro attachment list includes the following columns.
• Block: Shows the names of control panel blocks.
• Button: Shows the names of macro attachment assigned buttons (of up to 30
756
Macro Attachment Assigning
lights at the position where the macro attachment is set.
the fader lever position where the macro attachment is set, as a percentage
value. (Fader lever start position as 0%, end position 100%)
In the Macro menu, select VF2 'Attachment.'
Press [All Clear].
A confirmation message appears.
Select [Yes].
This deletes all macro attachment setting data.
characters).