Nd Row Of The Cross-Point Control Block - Sony MVS-6520 User Manual

Type
Sections
used
Independent Transition
key transition control block
Flexi Pad
Key Flexi Pad
snapshots
Key Flexi Pad
adjustments
Menu
Key wipes Device
control block
Menu
Resizer Device
control block
Notes
The transition control block on the ICP-3000/3016 does
not have buttons for inserting and deleting DSK5 to DSK8
independent key transitions. You can insert and delete
DSK5 to DSK8 using the [KEY ON] and [AUTO TRNS]
buttons on the Flexi Pad when in key snapshot mode.
Selecting DSK5 to DSK8 Signals in
the 2nd Row of the Cross-Point
Control Block
To select the DSK5 to DSK8 signals using 2nd row cross-
point buttons, it is necessary to assign the keyer delegation
buttons to the 1st row beforehand.
You assign them in the same way as key 1 to key 4 in the
Engineering Setup >Panel >Operation >Key/AUX/
Function Assign menu (7326.13).
1 "Assigning a Bus or Function to 1st Row
For details,
Buttons" (p.
340).
1
In the 1st row, press the button assigned to one of
DSK5 to DSK8.
2
In the 2nd row, select the desired signal.
Operation
Refer
to
Insert/delete DSK1 to p. 414
DSK8 using
independent key
transitions.
Set DSK1 to DSK8 p. 415
independent key
transitions.
p. 415
Save/recall DSK1 to
DSK8 key snapshots.
p. 416
Select DSK5 to DSK8
in the Flexi Pad.
Select DSK5 to DSK8 p. 416
using the menu VF
buttons.
Select DSK5 to DSK8 p. 416
in the device control
block.
Select to set key 1 to 4 p. 416
or key 1 to 8 as the
key wipe position
adjustment keys.
Select key 5 or key 6 p. 417
resizer on the device
control block.
Selecting DSK1 to DSK8 using the
Next Transition Selection Buttons
In order to select DSK5 to DSK8 using the next transition
buttons, it is first necessary to assign the buttons required
for operation in the Engineering Setup >Panel >Transition
Module menu (7321.9).
1 "Setting Transition Control Block Button
For details,
Assignments" (p.
327).
Next transition selection buttons
8- keyer transition control block
(PGM/PST bank)
The following describes how to select DSK1 and DSK5 as
an example.
To select DSK1
With the [SHIFT] button off, press the [DSK1/DSK5]
button.
To select DSK5
Press [SHIFT], turning it on, then press the [DSK1/DSK5]
button.
To select DSK1 and DSK5 simultaneously
1
With the [SHIFT] button off, press the [DSK1/DSK5]
button.
DSK1 is selected.
2
Press the [SHIFT] button, turning it on.
3
Press and hold the [ADD] button, then press the
[DSK1/DSK5] button.
DSK1 and DSK5 are both selected.
ADD button
SHIFT button
413
8-Keyer Operation