Sony DVS-9000 System User Manual page 344

4
To return the parameters to their default settings
In the <Primary CCR> group, press [Unity].
Masking a part of the primary color correction
Here the procedure for mask 1 operation is described by way of example. You
can carry out mask 2 operation in a similar way.
1
2
3
344
Color Corrector Functions
Depending on the selection in step 3, adjust the following parameters.
• When Black or Gamma is selected
Knob Parameter Adjustment
1 Red Red signal adjustment
2 Green Green signal adjustment
3 Blue Blue signal adjustment
4 All Simultaneous RGB adjustment
• When White is selected
Knob Parameter Adjustment
1 Red Red signal adjustment
2 Green Green signal adjustment
3 Blue Blue signal adjustment
4 All Simultaneous RGB adjustment
• When Knee is selected
Knob Parameter Adjustment
1 Red Red signal adjustment
2 Green Green signal gain
3 Blue Blue signal gain
4 All Simultaneous RGB adjustment
In the <Primary Mask> group of the Primary CCR menu, press [Mask1],
turning it on.
Press [Mask1 Adjust].
The Mask1 Adjust menu appears.
In the <Mask Source> group, select the mask source.
Box: signal from dedicated box generator
Pattern: signal from dedicated pattern generator
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Red value is shown
Setting values
0.00 to 200.00
0.00 to 200.00
0.00 to 200.00
Red value is shown
Setting values
20.00 to 75.00
20.00 to 75.00
20.00 to 75.00
Red value is shown