Color Mix Settings - Sony DVS-9000 System User Manual

Mix Color: a mix color signal combining color 1 and color 2 (see the next
section, "Color Mix Settings")
Ext Video: an external video signal input to the Ext IN connector
2
When Flat Color is selected in step 1 only, adjust the following parameters.
Knob
1
2
3

Color Mix Settings

Note
The color mix function is not supported on the MVE-8000A.
Creating a color combination pattern
To select the pattern
1
In the DME menu, select VF1 'Edge' and HF7 'Color Mix.'
The Color Mix menu appears.
2
Press [Mix Pattern Select].
The Mix Pattern Select menu appears.
3
Press any of the displayed patterns (standard wipe patterns 1 to 24) to
select it.
In this state, you can adjust the pattern size and border softness with the
knobs.
(For details of the parameters, see the next item.)
To set the pattern size and position
1
In the Color Mix menu, press [Position/Size].
2
Set the following parameters.
The setting values of the parameters depend on the system aspect ratio (4:3
or 16:9), as follows.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
475