Adjustment Of Skew; Simplex Copying; Duplex Copying - Toshiba e-STUDIO206L Service Manual

6.13.3

Adjustment of skew

Notes:
Check if the image adjustment for the equipment is performed properly before this adjustment of
the RADF. Also, the RADF position and height shall be adjusted properly.
[A] Checking
Check the image using the chart (original) with vertical and horizontal lines in the following procedure.

Simplex copying:

(1) Place the chart provided as an original with its face up on the original tray of the RADF, select [1
Sided -> 1 Sided] and press the [START] button.
(2) Superimpose the chart on the copy and check the inclination of the copy image.

Duplex copying:

(1) Place the chart provided as an original with its face down on the original tray of the RADF, select
[2 Sided -> 2 Sided] and press the [START] button.
(2) Superimpose the chart on the copy and check the inclination of the copy image.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SETTING / ADJUSTMENT
Fig.6-88 Chart (Original)
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
6 - 78