Lower Drawer Detection Switch (Sw7) - Toshiba e-STUDIO206L Service Manual

(4) Disconnect 1 connector and then take off the
low-speed clutch.
Notes:
Match the rotation stopper of the clutch with
the position shown in the figure for
assembling.
(5) Remove 1 bushing and gear.
(6) Disconnect 1 connector and then take off the
Hi-speed clutch.
Notes:
Match the rotation stopper of the clutch with
the position shown in the figure for
assembling.
4.9.29

Lower drawer detection switch (SW7)

(1) Pull out the lower drawer.
(2) Take off the rear cover.
 P. 4-3 "4.1.6 Rear cover"
(3) Remove 2 screws and then take off the
bracket.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Low-speed clutch
Fig. 4-229
Hi-speed clutch
Gear
Bushnig
Fig. 4-230
Bracket
Fig. 4-231
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 81
DISASSEMBLY AND REPLACEMENT
4