Main Charger - Toshiba e-STUDIO206L Service Manual

(3) Release the harness from the harness clamp
and pull out the discharge LED.
Notes:
The number of the discharge LEDs for the e-
STUDIO206L/256/306 / 207L/257/307 differs
from that for the e-STUDIO356/456/506 /
357/457/507, therefore do not install the
LEDs in a wrong model.
4.11.4

Main charger

(1) Take off the discharge LED unit
( P. 4-90 "4.11.3 Discharge LED").
(2) Pull out the main charger and take it off by
sliding it to the rear side.
Notes:
Be careful not to touch or scratch the drum
surface at this time.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-257
e-STUDIO206L/256/306 /207L/257/307
e-STUDIO356/456/506 / 357/457/507
Fig. 4-258
Fig. 4-259
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 91
Discharge LED
Main charger
DISASSEMBLY AND REPLACEMENT
4