4.10 DRIVE SYSTEM
4.10.1
Main motor (M8)
(1)
Take off the flywheel.
P. 4-78 "4.9.24 Flywheel (e-STUDIO356/
456/506 / 357/457/507)"
(2)
Disconnect 2 connectors (1 with a lock).
Remove 2 screws and then take off the main
motor.
4.10.2
Toner motor (M4)
(1)
Take off the rear cover.
P. 4-3 "4.1.6 Rear cover"
(2)
Disconnect 1 connector.
(3)
Remove 1 screw and then take off the toner
motor together with its bracket.
Notes:
Be sure not to drop the gear and bushing.
(4)
Remove 2 screws, and take off the toner
motor.
Notes:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the motor
could be damaged.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Main motor
Fig. 4-241
Gear
Bushing
Toner motor
Fig. 4-242
Toner motor
Fig. 4-243
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 85
DISASSEMBLY AND REPLACEMENT
4