Carriage-1 - Toshiba e-STUDIO206L Service Manual

4.6.10

Carriage-1

(1) Remove the original glass.
 P. 4-45 "4.6.1 Original glass"
(2) Remove the rear top cover.
 P. 4-12 "4.2.7 Upper rear cover"
(3) Remove the front top cover.
 P. 4-10 "4.2.2 Front upper cover"
(4) Move carriage-1 [1] to the leftmost side, and
make sure that the screws on carriage-1 are
showing.
Notes:
To move the carriage, manually rotate the
drive pulley.
(5) Remove 2 screws.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Fig. 4-148
Fig. 4-149
Fig. 4-150
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 52