(6)
Remove 1 harness clamp [4], and then take
off the control panel unit.
4.4.2
KEY board
(1)
Remove the control panel unit.
P. 4-22 "4.4.1 Control panel unit"
(2)
Remove 8 screws and take off the cover [1].
(3)
Remove 7 screws and disconnect 1 flat
cable, and take off the KEY board [1].
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-66
Fig. 4-67
Fig. 4-68
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 23
DISASSEMBLY AND REPLACEMENT
4