Offset Gate Motor (M13) - Toshiba e-STUDIO206L Service Manual

4.14.9 Offset gate motor (M13) (only installed for e-STUDIO356/456/506 /
357/457/507)
(1) Take off the reverse unit.
( P. 4-124 "4.14.1 Reverse unit (only
installed for e-STUDIO356/456/506 / 357/
457/507)")
(2) Disconnect 1 connector, remove 2 screws,
and take off the offset gate motor.
4.14.10 Reverse roller (only installed for e-STUDIO356/456/506 / 357/457/
507)
(1) Take off the reverse motor.
( P. 4-129 "4.14.6 Reverse motor (M14)
(only installed for e-STUDIO356/456/506 /
357/457/507)"
(2) Remove 1 gear, 1 Clip, 2 springs and 2
bushings, and take off the reverse roller.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Connector
Clip
Bushing
Springs
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 132
Offset gate motor
Fig. 4-374
Reverse roller
Rollers
Bushing
Gear
Fig. 4-375