Bypass Tray - Toshiba e-STUDIO206L Service Manual

4.9.10

Bypass tray

(1) Take off the transfer unit.
 P. 4-99 "4.11.17 Transfer unit"
(2) Open the bypass tray and then remove the
stopper by twisting it for 90 degrees.
(3) Remove 1 screw and then take off the link
arm.
(4) Remove 1 screw and then take off the
harness cover.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Stopper
Fig. 4-193
Fig. 4-194
Harness cover
Fig. 4-195
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 69
Stopper
Lever
Link arm
DISASSEMBLY AND REPLACEMENT
4