Toshiba e-STUDIO206L Service Manual page 275

Notes:
After removing the ADU, attach the fixing
band to the holder as shown in the figure.
4.15.2 ADU entrance sensor (S11)
(1) Take off the ADU.
( P. 4-134 "4.15.1 Automatic Duplexing
Unit (ADU)")
(2) Remove 4 screws, disconnect 1 connector,
and then take off the ADU upper guide.
(3) Release the latches and take off the ADU
entrance sensor.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fixing band
Fig. 4-380
Fig. 4-381
Fig. 4-382
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 135
Connector
ADU upper guide
ADU
entrance
sensor
DISASSEMBLY AND REPLACEMENT
4