Toshiba e-STUDIO206L Service Manual page 278

(4) Remove 2 screws and take off the ADU
motor.
4.15.5 ADU opening / closing switch (SW5)
(1) Take off the right rear cover-1 and the right
rear cover-2.
( P. 4-6 "4.1.13 Right rear cover-1 / Right
rear cover-2")
(2) Disconnect 1 connector and remove 1 screw,
and then take off the switch unit.
(3) Take off the ADU opening/closing switch with
pressing the both sides of it.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 138
ADU motor
Fig. 4-389
Connector
Switch unit
Fig. 4-390
ADU opening/closing
switch
Fig. 4-391