microHAM micro2R u2R User Manual page 56

Abort:
This command aborts the current message and clears message queue.
MA<CR> AbortMessage()
Playback:
This command starts message playback – index is 1 to 9
MPm<CR> PlayMessage(msgIndex)
This command starts message playback in a loop – index is 1 to 9, interval is 0 to 9 seconds.
MPImi<CR> PlayMessagePeriodically(msgIndex, interval)
Record:
This command starts message recording – index is 1 to 9
MRm<CR> StartMessageRecording(msgIndex)
This command stops message recording.
MRS<CR> StopMessageRecording()
DVK Message Bank Select:
This command selects voice message bank – applies only to DVK.
MBname<CR> SetMessageBank(msgName)
microHAM © 2010 All rights reserved
56